圓柱形保險絲夾

適用于“Snap-In”和“Press-In”安裝配置的 1AG，2AG，3AG，4AG，5mm和5AG（Midget-SPF）保險絲用于PCB保險絲夾的UL認證

• 由黃銅和鍍錫制成，以確保低接觸電阻和**的保質期，
• 夾具設計用于在波峰焊接過程中輕松安裝并保持穩定的位置。
• 薄型節省空間的夾子還具有方向標簽和終點擋板，以確保**性和設計完整性。
• 具有End Stop的保險絲夾符合Underwriters Laboratories Inc.（UL）組件程序，UL文件號E354010。

一、2AG / 5mm圓柱形保險絲夾

• 材質：  黃銅，鍍錫板
• 在焊接過程中，卡入式設計可牢固地固定在PC上
• 直腿設計不提供力組裝。
• 帶有終點擋塊的夾子是UL認可的E354010 

PART NUMBER	A	B	SNAP IN	CURRENT RATING	DRAWING - PC MOUNT	IMAGE
3517	.060 [1.5]	.060 [1.5]	No	15 Amp
3518P	.060 [1.5]	.093 [2.4]	No	15 Amp
3512	.060 [1.5]	.060 [1.5]	Yes	15 Amp
3512P	.060 [1.5]	.093 [1.5]	Yes	15 Amp

PART NUMBER	UL RATING	DRAWING	IMAGE
3520	6.3 Amps
3519	15 Amps
3562 5mm / 3AG	15 Amps

PART NO. BULK	ON TAPE AND REEL	END STOPS/  UL LISTED	CURRENT RATING	DRAWING	IMAGE
3521	-	Yes	15 Amps
3621	-	No*
3561	3561TR 3561KTR	Yes	15 Amps
3622	3622TR  3622KTR	No*

二、.250“直徑圓柱形保險絲夾

適用于.250 [6.4]直徑圓柱形保險絲

• 通孔可安裝
• 卡入式或直式PC腿
• 材料： .020“（。51）黃銅，鎳板
• 15安培額定電流

PART NUMBER	A	B	UL RECOGNIZED /END STOPS	DRAWING	IMAGE
3515	.060 [1.5]	.060 [1.5]	Yes
3515P	.060 [1.5]	.093 [2.4]	Yes
3516P	.060 [1.5]	.120 [3.0]	Yes
PART NUMBER	H	L	UL RECOGNIZED /END STOPS	DRAWING	IMAGE
3510	.421 [10.7]	.140 [3.6]	No
3529	.421 [10.7]	.140 [3.6]	Yes
3511	.430 [10.9]	.250 [6.4]	No
3514	.430 [10.9]	.250 [6.4]	Yes
PART NUMBER	UL RECOGNIZED /END STOPS		DRAWING		IMAGE
3513	Yes
3530	Yes
3562 3AG / 5mm	Yes

鉚釘安裝保險絲夾

• 可提供焊接接線片
• 通過Quick-Fit標簽實現Avaialble
• 材料： .020“（。51）黃銅，鎳板
• 15安培額定電流

PART NUMBER	UL RECOGNIZED / END STOP	DESCRIPTION	DRAWING	IMAGE
3533	Yes	Flat Solder Lug (A=0°)
3535	Yes	45° Solder Lug
3570	Yes	Without Lug
3531	No
3532	Yes
3567	No

三、4AG（9/32“）圓柱形保險絲Clips

  Keystone  3565